Buzz into the sunny seasons with the Crochet Bee Gnome, a cheerful little character that’s sure to bring a smile to your face! 🐝🧶 Dressed in bold bee stripes and topped with buzzing little bees on his hat, this gnome is a playful blend of whimsy and warmth. His fluffy beard, striped legs, and bright yellow shoes make him the perfect handmade accent for spring or summer décor—whether perched on a shelf, nestled in a garden nook, or gifted to a fellow bee lover.
Perfect for crocheters who enjoy vibrant colors and charming details, this pattern invites you to stitch up a gnome that’s as sweet as honey. Add a tiny flower, personalize his hat, or create a whole hive of bee-themed friends to keep him company. The Crochet Bee Gnome is a joyful way to celebrate sunshine, creativity, and a touch of handmade magic—one loop at a time! 🧵🌼

🐝 Crochet Bee Gnome Pattern
This cheerful crochet gnome features bold yellow and brown bee stripes, adorable bees perched on his hat, a fluffy white beard, and yellow lace-up sneakers!
✨ Skill Level
Intermediate – involves amigurumi shaping, color changes, faux fur beard, and small appliqué bees.
📏 Finished Size
Approx. 25–30 cm (10–12 inches) tall when seated
🧶 Materials
- Worsted weight yarn:
- Yellow (main color)
- Brown/chocolate
- White
- Black
- Faux fur or brushed white yarn (for beard)
- Crochet hook: 3.0–3.5 mm
- Fiberfill stuffing
- Black embroidery thread
- Wire (optional, for hat shaping)
- Small brown shoelaces or embroidery floss
- Yarn needle & scissors
🔤 Abbreviations (US Terms)
- MR = Magic Ring
- sc = single crochet
- inc = increase (2 sc in same st)
- dec = decrease (sc2tog)
- sl st = slip stitch
- ch = chain
- FO = fasten off
- BLO = back loop only
🏠 Pattern Instructions
Body (yellow & brown stripes)
Start with yellow.
- MR, 6 sc (6)
- inc × 6 (12)
- (sc, inc) × 6 (18)
- (2 sc, inc) × 6 (24)
- (3 sc, inc) × 6 (30)
- (4 sc, inc) × 6 (36)
Rounds 7–11: sc around in yellow (36) (5 rounds)
Switch to brown: Rounds 12–16: sc around in brown (36) (5 rounds)
Switch to yellow: Rounds 17–21: sc around in yellow (36) (5 rounds)
Switch to brown: Rounds 22–26: sc around in brown (36) (5 rounds – optional, may be hidden by beard)
- (4 sc, dec) × 6 (30)
- (3 sc, dec) × 6 (24)
- sc around (24)
FO, stuff firmly.
Legs (make 2, bold stripes with white accents)
Start with yellow.
- MR, 6 sc (6)
- (sc, inc) × 3 (9)
Continue striping pattern with white accent lines:
- Rounds 3–6: yellow (9) (4 rounds)
- Round 7: white (9) (1 round)
- Rounds 8–11: brown (9) (4 rounds)
- Round 12: white (9) (1 round)
- Rounds 13–16: yellow (9) (4 rounds)
- Round 17: white (9) (1 round)
- Rounds 18–21: brown (9) (4 rounds)
- Round 22: white (9) (1 round)
- Rounds 23–26: yellow (9) (4 rounds)
- Round 27: white (9) (1 round)
- Rounds 28–31: brown (9) (4 rounds)
FO, stuff lightly. Legs should be quite long and boldly striped with white accents.
Shoes (yellow sneakers with laces)
Start with yellow.
Sole:
- Ch 8, starting in 2nd ch from hook: 6 sc, 3 sc in last ch, continue on other side: 5 sc, inc (16)
- inc, 5 sc, inc × 3, 5 sc, inc × 2 (22)
- BLO: sc around (22) (creates ridge)
Sides: 4. sc around (22) 5. sc around (22) 6. sc around (22)
Shape toe: 7. 7 sc, dec × 4, 7 sc (18) 8. 6 sc, dec × 3, 6 sc (15)
Ankle: 9–11. sc around (15) (3 rounds)
FO, leave long tail.
Adding laces:
- With brown embroidery floss or thin yarn, create 3–4 pairs of small stitches on each side of ankle opening (like eyelets – rounds 10-11)
- Thread brown lace through in criss-cross pattern
- Tie in bow at top
- Optional: Add tiny bit of glue or stitches to keep laces in place
Insert stuffed legs into shoes and sew securely to leg opening.
Arms (make 2, yellow)
Start with yellow.
- MR, 6 sc (6)
- (sc, inc) × 3 (9) 3–5. sc around (9)
Optional: Add brown stripe at wrist 6–8. brown sc around (9)
Continue in yellow: 9–16. sc around (9)
FO, stuff lightly.
Nose (beige/tan)
With beige or light brown yarn:
- MR, 6 sc (6)
- inc × 6 (12) 3–4. sc around (12)
- (sc, dec) × 4 (8)
FO, stuff lightly and close. This will be hidden mostly by beard.
Beard (faux fur)
- Cut approximately 30–40 strands of white faux fur yarn, each 10–12 cm long
- Attach around and below nose area using latch-hook method or by sewing through the body
- Create a full, fluffy beard that covers lower third of body
- Trim to desired shape and fullness
Hat (tall striped cone with pom-pom)
Start with brown.
- MR, 6 sc (6)
- (sc, inc) × 3 (9)
- (2 sc, inc) × 3 (12)
- (3 sc, inc) × 3 (15)
- (4 sc, inc) × 3 (18)
- (5 sc, inc) × 3 (21)
- (6 sc, inc) × 3 (24)
- (7 sc, inc) × 3 (27)
- (8 sc, inc) × 3 (30)
- (9 sc, inc) × 3 (33)
- (10 sc, inc) × 3 (36)
Now begin bold stripe pattern:
- Rounds 12–16: brown (36) (5 rounds)
- Rounds 17–21: yellow (36) (5 rounds)
- Rounds 22–26: brown (36) (5 rounds)
- Rounds 27–31: yellow (36) (5 rounds)
- Rounds 32–36: brown (36) (5 rounds)
- Rounds 37–41: yellow (36) (5 rounds)
Begin decreasing for hat tip: 42. (10 sc, dec) × 3 (33) 43–47. yellow (33) 48. (9 sc, dec) × 3 (30) 49–52. brown (30) 53. (8 sc, dec) × 3 (27) 54–57. brown (27) 58. (7 sc, dec) × 3 (24) 59–61. yellow (24) 62. (6 sc, dec) × 3 (21) 63–64. yellow (21) 65. (5 sc, dec) × 3 (18) 66. yellow (18) 67. (4 sc, dec) × 3 (15) 68. brown (15) 69. (3 sc, dec) × 3 (12) 70. (2 sc, dec) × 3 (9) 71. (sc, dec) × 3 (6)
FO, stuff hat lightly. Insert wire through center if desired for poseable curl.
Pom-pom for hat tip: Make small yellow pom-pom or crochet small ball:
- MR, 6 sc (6)
- inc × 6 (12)
- sc around × 2 (12)
- dec × 6 (6)
- FO, stuff, sew to hat tip
Bees (make 2)
Body: Start with yellow.
- MR, 6 sc (6)
- inc × 6 (12)
- (sc, inc) × 6 (18)
Rounds 4–5: yellow (18)
Switch to black: Rounds 6–7: black (18)
Switch to yellow: Rounds 8–9: yellow (18)
- (sc, dec) × 6 (12)
- dec × 6 (6)
FO, stuff firmly.
Wings (make 4 total, 2 per bee): With white yarn:
- Ch 6
- In 2nd ch from hook: sc, hdc, dc, hdc, sl st
- FO
Sew two wings onto back of each bee.
Face (optional): Embroider small black dots for eyes and smile with black thread.
🪡 Assembly
- Legs & Shoes: Insert stuffed legs into shoes, sew securely. Attach to bottom of body in sitting position (legs forward).
- Arms: Sew to sides of body at shoulder height.
- Nose: Position in center of body, approximately 1/3 down from top.
- Beard: Attach faux fur strands generously around and below nose, creating full fluffy beard.
- Hat: Place striped hat on top of body, covering upper portion. Sew securely all around base. Curl the tip to one side.
- Bees: Attach both bees to hat – one near the tip/curl area, one on the front/side of hat. Position them as if landing or flying around the hat.
- Shoe laces: Add final touches to laces, creating neat bows.
🎉 Final Touches
- Brush out the beard for maximum fluffiness
- Position the hat curl to your preference
- Adjust bee placement for personality
- Your bee gnome is ready to brighten any space!
Perfect for spring and summer décor, garden lovers, or as a cheerful gift! 🐝✨💛